Lg Tub Clean Cycle (2023 Procedures!)

Lg Tub Clean Cycle

My washing machine decided to play a little trick on me. It was a typical Saturday, and I had mountains of laundry to conquer.

I just loaded the washer and I couldn’t help but notice an odd smell, like a combination of gym socks and old cheese.

Yikes! What a mess this was.

I literally had a podcast to listen to in an hour and I didn’t even know what to do.

So, I embarked on a journey to conquer the mystery stench before the long anticipated podcast began.

However, I discovered that a certain LG tub clean cycle could transform my washer into a fragrance wonderland.

To activate this cycle, you need to use the LG washer clean tub cycle feature, add some detergents then press start.

What Is Tub Clean On Lg Washer?

The Tub clean cycle on lg washer is a maintenance routine cycle that is simply carried out to clean the interior of your washing machine. It’s actually the longest cycle with the hottest water.

If you are willing to get rid of the sticky layers of sludge and buildups you’ve noticed in your washer, you can use the tub clean cycle for this.

It’s just a common feature on your washing machine that helps keep the tub clean and free from bacteria and germs.

This cycle only uses water and detergent to work, the sidelines is just that it isn’t available on all lg washer models.

So only newly manufactured lg washing machines actually comes with this feature.

You can check the control panel of your washer or the owner’s manual to confirm if your model has the clean tub features.

How To Use Lg Washer Tub Clean Cycle?

Using the tub clean cycle on your lg washer is really easy and simple to do depending on your model. 

Some models comes with a round knob which is used in choosing the settings while other comes with small touch pad button.

Tub clean cycle on lg washer

Irrespective of which of these is on your appliance, below are the procedures on how to start tub clean lg washing machine.

Important Info before beginning the tub clean cycle: For front load washers; remove the dispenser attachments and clean the tray.

Clean the washer gasket with a solution of ¾ cup of bleach and water. The drain the washer and clean the drain pump filter manually.

  • Step 1: Ensure that the washing machine tub is empty as no clothes or laundry is expected to be in the washer for the tub clean cycle to run effectively.
  • Step 2: Press the power button, then use the cycle button to select the “tub clean cycle”. This is particularly for lg washers with the tub clean feature.
  • Step 3: Add a small amount of cleaner according to what the manufacturer recommends. 
  • Step 4: Press the “Start” button and the display panel should show TCL on the screen immediately. After the cycle starts, the remaining time until it stops will be displayed on the screen.

You need to be aware that the above procedure depends on the model of your washing machine. 

At a particular point, some models might not display “TCL” on the control panel while others might have a different clean tub button location.

How To Use Lg Washer Tub Clean Cycle

Here’s how you can locate the tub clean cycle button.

Mostly, for newer front load lg washers, you need to look carefully at the black touch screen buttons for an asterisk (*) and “tub clean” which is highlighted a in small writing.

Sometimes you’ll find this on the “rinse” button, check for the one that has (*) then press and hold for 5 seconds until the TCL appears on the screen.

Then press start to start the clean cycle.

No Tub Clean Option On Lg Washer?

You can’t find the tub clean option on your washing machine control panel? This is probably because you are using an old model. 

Don’t worry, all isn’t lost! There is still an alternative for the tub clean cycle feature you can use.

If your washing machine does not have the tub clean feature, do this: 

  • Simply run a norma washl cycle or hottest wash with hot water and fill ⅔ of the tub with clean water.
  • Add the recommended amount of washing machine cleaner or fill the dispenser with just a moderate amount.
  • Only run the wash cycle for about 3 minutes so that the cleaner can thoroughly mix inside the tub.
  • Next, wait for about 2 to 4 hours before running a full wash cycle.

Note: It’s recommended that you avoid using natural detergents like soap, and bleach because they cause dirt to build up on the tub easily 

How Long Is Tub Clean Cycle On Lg Washer?

Usually, the tub clean cycle take about 30 minutes to 1 hour 30 minutes to complete the cycle.

The time will be illuminated on the display on the control panel.

Once the cycle time is up, you can make sure to rinse and dry the inside of the washer by leaving the lid open as this also helps to prevent musty odor and build ups.

It’s recommended that you clean your lg washing machine at least once a month. 

No Tub Clean Option On Lg Washer

Related: Sanitary Cycle On LG Washing Machine

Do You Put Detergent In Lg Tub Clean Cycle?

Yes you can add detergent in a tub clean cycle on lg washer! You can either add the detergent manually or via the use of the detergent dispenser.

The 3 types of washers you can use includes tablets, powders and liquid cleaners.

Specifically for liquid detergents and powders, you can add them into the tub by using the washer compartment in the dispenser.

While tablets should be added directly inside the tub.

Frequently Asked Questions!

Can I use bleach for tub clean?

Ofcourse you can bleach to clean your washer tub as they’re useful for killing bacteria, getting rid of mold and mildew build up in the tub.

A simple solution of bleach or liquid chlorine bleach is recommended by LG, but might not be as effective as washing machine tub cleaners.

You need to follow the manufacturer’s guidelines carefully regarding the use bleach so as to avoid leaving bleach residue on clothes or damaging the washer.

Can I use vinegar instead of bleach for tub clean?

Yes, vinegar is another tightly close alternative to bleach. It is really natural, non-toxic and very effective in cleaning the tub of your washer.

Lg washing machine recommends using white distilled vinegar for monthly tub clean and maintenance.

Lg front load washer tub clean cycle

Is bleach or vinegar better to clean washing machine?

These two cleaners are both helpful for removing buildups, foul odors and funky smell. Whether or not one is better depends on your preference.

But you must only use one of two, don’t use them both at the same time.

Final Thoughts

We hope you’ve been able to detect whether your lg washer has the tub clean cycle feature or not. At this point, you should also be able to use this feature effectively.

If you are interested in finding more information and related contents to this, you can check out other articles below. Thanks for reading!

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like