Samsung Washer Off Balance (2023 Fixes!)

Samsung Washer Off Balance

Samsung manufactures one of the best washing machines out there. Although sometimes these appliances can get faulty and worn out.

Is your samsung washing machine off balance and you don’t know the causes or and how to fix it? Be rest assured that you’re at the right place to find a correct answer to your problem.

Most times, your Samsung washing machine is off due to a damaged drum bearing, an unbalanced washer, excessive loads in the washer, damaged shock absorber, worn out suspension rods and dampening straps, presence of heavy foreign objects and corroded shaft.

In this article we’ll be highlighting how you can troubleshoot these issues with simplified fixes. Let’s get into it!

Samsung Washer Out Of Balance? Reasons and Fixes

There are numerous reasons why you might be experiencing this issue with your samsung washing machine, most of which has been mentioned above. 

In a rush? Here is a tabular representation that shows you the probable reasons, what is to inspect and quick ways to fix the problem.

Probable ReasonsWhat To Check Quick Fixes
1Heavy foreign items are in the washer
Check the inner tub for any stuck foreign objects.Get rid of these items and ensure the loads are placed evenly.
2Problem with the shock absorberInspect for any leaks in the shock absorber.Find a replacement if damaged.

The washing machine is not leveled on ground
Check the rubber anti-vibration pads under the washer feet. Adjust the rubber anti-vibration pads and ensure the washer is not tipping forward and backwards.
4Damaged or worn out bearingsTake apart the washing machine and inspect the bearings for any damages.Remove and replace damaged drum bearings.
5Unbalance loads in the washerCheck for excessive amount of loads.Remove excess loads in the washer until the washer stops banging against opposite sides. Wash a few loads at a time and remove large and bulky ones.
6Corroded washing machine shaftCheck if it’s sheared or corroded.Replace the shaft if it’s corroded.
7The agitator have come looseUse your hands to test the rotation of the agitator.Reattach or replace the entire agitator if detached or damaged.
8Faulty suspension rodsInspect by removing the top and front panel. Check for any damages on the rods.Find suitable replacements for the damaged suspension rods.
Related Article: Ge washer out of balance during spin 

Below is a detailed explanation of the reasons for an unbalanced Samsung washing machine and how you can fix them accordingly.

1. Uneven Loads In The Washer

If there are excess unbalanced loads in your samsung washer, it could cause the appliance to tilt to and fro as it gets out of balance. 

In order to fix this an unbalanced samsung washer, ensure that you put only the correct amount of loads in the washer which is proportional to the drum size. 

Remove excess loads and follow the instructions in your manual. It’s recommended that you leave a little bit of space between the loads in order to allow free flow of water.

How do I fix my samsung washer out of balance

2. There Are Foreign Items In The Washer

Stuck items or presence of heavy foreign objects might lead to an abnormal functioning of your samsung washer. 

In situations like this, all you have to do is check if there are any stuck materials in the drum or around, then remove them.

In addition to this, you should remove any heavy items in the washer and put them in a different space. 

You should wash these items one at a time as they’re so huge and should not be washed together in order to avoid getting your washing machine off balance while spinning.

3. The Washing Machine Is Not Leveled On Ground

One of the reasons why your samsung washing machine is off balance or out of balance during is due to appliances not being leveled. 

samsung washers have 4 leveling feet with rubber anti-vibration pads placed underneath. The feet are expected to stay firm in order to work efficiently. 

If any of these legs gets uneven or the rubber anti-vibration pads have come loose, it could cause your washing machine to be off balance.

Nevertheless, Begin to loosen the lockings by turning the legs clockwise and then adjust with a wrench or by hand.

  • To fix a samsung washer out of balance issue, you need to inspect and adjust the legs of the washer and ensure it’s not tipping forward and backwards. 
  • Check the flooring condition by ensuring it’s in good condition as it shouldn’t be cracked or waterlogged. If the flooring is moldy, repair the flooring or consider changing the area of the washer to a different location.

4. The Washing Agitator Have Come Loose

This is usually common for top load samsung washing machines. Sometimes, the agitator might get loose and this can result in the washer being unbalanced.

In order to check if the agitator of your washer is loosen or not, you need to place your hands inside the drum and inspect the center. Turn the agitator with your hand to inspect if it’s stable or not.

However, if it’s detached you can use a wrench to reattach it back. Be aware that if the agitator is completely damaged, you might need to replace it.

5. Worn Out or Faulty Drum Bearings

Drum bearings of samsung washing machine

The drum bearings play a very important role in supporting the rotation and spinning of your washing machine. Drum bearings usually wear out if water continuously seeps through the seals around the metal bearings.

  • For samsung front loaders, the drum bearings are located at the rear of the outer tub while top-loading samsung washers have their bearings attached to the inner tub.
  • In order to replace a damaged bearing, what you need to do is take apart the washing machine and replace the worn out bearings.
Related: Amana washer off balance (causes and fixes)

6. Shock Absorber Is Damaged

Shock absorbers are among the components that participate in the balance of a samsung washer. It goes between the outer tub and the base frame. If it’s worn out or damaged, it could be another reason why your washer might be unbalanced.

In order to fix a broken or faulty shock absorber, you need to dismantle the washing machine and take out the shock absorber.

You might need the help of a specialist to remove the back panel and dismantle the appliance. Irrespective of that – do note that all this needs is a replacement.

7. Corroded Motor Shaft

It’s really possible for the shaft of your washer to get corroded if it keeps getting in contact with water or detergent. A slight damage can result in the washer not getting balanced during a cycle.

The method to fix this issue is to replace the motor shaft with a new one. Once it’s replaced, your washing machine should stop spinning off balance.

8. Damaged Suspension Rods

A samsung washing suspension rod does not get damaged easily as they usually last for a minimum of 4 years. The rods act as a support for the washer tub and prevent it from being unstable and unbalanced.

Sometimes it does get damaged and worn out with time and this could be a reason why your washer is getting out of balance. 

Samsung washing machine suspension rods

To fix this, you need to locate the suspension rods by removing the top and front panels. Inspect if the suspension rods are damaged before replacing.

Related Article: Whirlpool washer off balance (Fixed!)

Frequently Asked Questions

Samsung Top Load Washer Out Of Balance?

Agitator issues are mostly associated with samsung top loaders. If your samsung top load washing machine is getting off balance, you should inspect the agitator, suspension rods, drum bearings, reduce the amount of loads, inspect the shock absorber and check the shaft.

Samsung Front Load Washer Out Of Balance?

Note that if your samsung top load washing machine is getting off balance, you should inspect the shock absorber, reduce the amount of loads, check the drum bearings, washing machine shaft and inspect the suspension rods.

Closing Remarks

With the detailed information above, we hope you’ve been able to fix your samsung washer that is off balance. Perhaps you are still experiencing difficulties in fixing the issue, you might definitely need the assistance of an appliance technician. 

  1. The washer has no agitator, but wades the items up in one spot, then goes banking. Model: WA45N3050AW/A4

    1. Hi Gary, here are a few things you should try.

      Balance and load the washer properly. Make sure you’ve checked the feet and floor. Also Check for any obstructions in the drum such as socks or small garments..

      If you’ve tried these steps and the issue persists, it may be best to contact the manufacturer for further assistance. Best regards!

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like