One of the ways of ensuring that your clothings gets thoroughly washed is by initiating the whirlpool washer soak cycle.
Perhaps you don’t know the function of this specific cycle, be rest assured that you’ll be provided with a detailed explanation on how it works below.
The soak cycle on a Whirlpool washer is mainly designed to remove thick stains that might require extra washing in order to get rid of. With this, it helps reduce the need for longer wash cycles for heavily stained fabrics.
In a hurry? Let’s dive into the how the washing machine soak cycle actually works, how to use it, in addition to the time it takes to complete and so much more.
How Does The Soak cycle on whirlpool washer Works?
The soak cycle which is also referred to as the pre-soak cycle comes in handy and is very useful for getting off tough stains like mud, juice and ink stains.
Instead of directly starting the wash cycle and dipping in all your very dirty clothes, you can use the soak cycle to pre-wash these clothes and then drain the wastewater out.
This cycle works in such a way that it spins with detergents inside the drum for a certain period of time depending on the soak time you’ve set.
You need to be aware that not all types of whirlpool washers comes with this specific feature. But you’ll surely find the “Pre-wash or “Extra rinse” cycle buttons on some other models.
How To Use Soak Cycle On Whirlpool Washer?
The soak cycle on a Whirlpool washer allows clothes to soak in water and detergent before the wash cycle begins.
This can help loosen dirt and stains, making them easier to remove during the wash cycle.
In order to start the soak cycle on your whirlpool washing machine, you need to first confirm if you washer has the feature.
If the soak cycle feature is available, then you can proceed with the guidelines below.
Step 1: Load the extremely dirty clothes you want to wash into the washing machine and make sure they’re evenly distributed.
Step 2: Add an appropriate amount of detergent inside the drum. Just make sure that it isn’t too much in order to avoid excessive suds. It’s just a prewash, not an actual wash cycle so you don’t need much detergents.
Step 3: Select the cycle by using the knob or button depending on the model of your washer. Set and adjust amount of time you want the cycle to run.
Step 4: Once this is set, you’ll notice that the washer will begin to fill up with water and will begin immediately when it’s filled up to the appropriate level.
While the washing machine spins throughout the soak cycle time, your clothing is allowed to soak in the detergent and water as it helps to loosen any dirt or stains.
Then, the washer will drain the dirty water and start the wash cycle subsequently.
How Long Is Soak Cycle On Whirlpool Washer?
Different models of whirlpool washers comes with varying length of soak cycles to select. On a general note, the soak cycle can last from 30 minutes to 2 hours.
Some washers only have options to choose between 30 min, 1 hour or 2 hours while others even let you select up to 8 hours soak cycle time.
In order to know that exact whirlpool washer soak cycle time for your washing machine, you should consult the user manual.
Realistically, you don’t really need an 8-hour streak of soaking and spinning to pre-treat your heavily soiled clothings. Just a few hours is enough until the actual wash cycle is initiated.
Related: Lg Tub Clean Cycle (Explained)
What Are The Pros And Cons Of Whirlpool Washer Soak Cycle?
Irrespective of the fact that there are several advantages of this feature, it still comes with a few disadvantages which I would like you to know about.
|1||Soak cycle saves time by reducing the overall washing time required for heavily stained clothes.||Over soaking can potentially damage the some incompatible clothings and fabric.|
|2||Assists in loosening and removing stains more effectively.||It uses extra amount of water which can be wasteful at times.|
|3||Reduces the need for longer wash cycle.||Results in longer washing time which also leads to residue build-up.|
Frequently Asked Questions On Whirlpool Washer Soak Cycle Time
Q1: How to soak clothes in whirlpool top load washer?
For top load whirlpool washers, they usually have their lids located on top of the washing machine with a strong coilled agitator.
In order to soak clothes in a whirlpool top load washer, you need to manually put your clothings inside the drum and then close the lid. You are required to leave the clothes inside the appliance until the soak cycle time is elapsed.
Q2: Whirlpool top load washer soak cycle?
The soak cycle of your whirlpool top load washer is specifically expected to run before the actual wash cycle. The goal is to get rid of excessive dirt or stains before re-washing to clothes again.
To start the pre-soak cycle on this appliance, you need to add your clothes inside the washer drum and add a little bit of detergent.
Select the wash soak cycle on the control panel and the drum will begin to get occupied with water. When it’s done, the cycle will run for sometime before eventually draining the water.
Q3: Whirlpool front load washer soak cycle?
Whirlpool front load washing machines do not come with the soak cycle feature. If you are using a whirlpool front load washer, you might not have access to using the soak cycle.
Alternatively, you can soak your clothings overnight as this will reduce the heavy stains on it.
Note that whirlpool washer soak cycle is not available on all models. We hope that you have been provided with all that’s expected to know regarding the soak cycle feature and how to use it.
Whether you are looking for related contents or you just want to look around, you can check out other similar posts that’s been highlighted for you below.