7 Ways To Fix Whirlpool Duet Dryer Beeps Once Won’t Start Problems

whirlpool duet dryer beeps once won't start

Have you ever had an experience with your whirlpool dryer, whereby the appliance just beeps once and won’t start? 

In cases like this, there won’t even be any display of error codes to indicate the root of the specific problem.

Most of the time after choosing a dry cycle and hitting the start button, the dryer just suddenly beeps once or more and becomes idle. 

In situations like this, there are several possibilities attached to this problem, most of which we will be paying attention to in the post. 

Note that there is a clear difference between a situation where your dryer beeps once and when it beeps continuously.

In a quick response to this issue, the common reasons why this happens to your dryer is mainly due to a faulty power unit, if there is an error with the heater relay on the control board, a faulty control panel, clogged lint filter and many more. 

Don’t worry, I will take you through all of this and the right way to deal with them. Stay tuned and let’s get started!!

What Are The Causes Of Whirlpool Duet Dryer Beeps Once Won’t Start?

Here is an overview of the reasons why it could be occurring with your dryer at the moment, before we dive thoroughly into details. 

  • Problem with the door switch or latch
  • The lint filter is probably clogged or blocked with dirt
  • Problem with constant overheating of the appliance
  • Too much heavy laundry load in the dryer
  • A faulty control panel that needs replacement
  • Blown thermal fuse
  • Error with heat relay on the control board and many more.
Why My Whirlpool Duet Dryer Beeps Once And Won’t StartQuick And Easy Fixing Solutions
Faulty control panelReset or replace the control panel.
Clogged lint filterRemove every single dirt that might be blinking the lint filter.
Problem with the door switchRest the door very well and make sure it’s properly closed.
Blown thermal fuseGet a replacement for the fuse or first of all test for its continuity.
Too much heavy laundry load in dryerReduce the load in the appliance.
Error with heat relay on the control boardReplace the fuse at first.

Whirlpool Duet Dryer Beeps Once Won’t Start – How Do I Fix This Issue

1. The Door Switch Problem

This is perhaps the first procedure you need to look out for before attempting other complicated fixes. It’s a really easy one to troubleshoot.

whirlpool duet dryer door latch

If your dryer door is defective, faulty or probably not closed properly, you might experience this certain issue with the dryer whereby it beeps once and won’t start. 

How To Fix This Issue:

Ensure that the door is correctly locked in the right position as your dryer probably won’t start if the door is not closed properly.

  • All you have to do is press the surface of the door firmly against the body of the dryer using your hands. This will ensure that it’s fully shut.
  • The door might just need a little bit of resetting in order to get back to work. If it doesn’t work then you might need to check if the door switch is broken or not.
  • If it’s broken, you should replace the door switch yourself or get in contact with a technician to do that for you.

Sometimes, the dryer usually displays error codes to highlight the problem but this particular issue might not show any codes at all.

Now you are all left alone to try to figure this out yourself and you should be able to do this with the assistance of the aforementioned fixing procedures.

2. Inspect The Heating Element Of The Dryer

If your dryer gets overheated to an extent you might begin to experience issues related to the appliance beeping once and shutting down or doesn’t start at all.

  • To fix this issue, you have to check the dryer for overheating. There are different components of the dryer you need to check if the appliance is overheating and this includes the heating element, lint filter and many more.
  • Regarding the lint filter, you just have to ensure that it isn’t blocked so as to prevent the dryer from overheating. Overall, this should be done to fix the whirlpool duet dryer won’t start but beeps once problem.

3. Check The Control Panel for Any Errors Of If Its Malfunctioning

The control panel is perhaps responsible for carrying out most functions in the dryer. 

When this component of the appliance starts to malfunction, it could have a negative effect on your dryer to the extent that you begin to have issues with the power as it won’t start normally, beeps once and other stuff like that.

whirlpool duet dryer control panel

If no changes occur after resetting your whirlpool dryer (turning it off and waiting for a few minutes before turning it on back). It’s time for a replacement, you need to replace the control panel. 

Note that it is not necessary that you call a service man in order to replace the control panel. You can simply do this yourself as long as you have the required tools. 

Related: Maytag Dryer Beeps Twice But Won't Start

4. Inspect The Lint Filter If It Is Clogged Or Blocked By Dirt

A whirlpool duet dryer might just beep once and decide not to turn on if it detects that there’s some kind of dirt clogging up the lint filter. 

Now, when it does this it is your own personal job to troubleshoot since you are already aware of the root of the problem. 

  • What you have to do is first of all remove the lint screen and make sure you have unplugged the dryer before doing this.
  • You can place your fingers in the corners of those filters to clean the filter or use a vacuum cleaner to remove all excess lints.

5. Test The Thermal Fuse To Inspect If It Needs Replacement

The next method of fixing this issue is to test the thermal fuse if it’s working perfectly or carry out the process of replacing if not. 

testing the thermal fuse of whirlpool duet dryer

The responsibility of this safety switch is to blow out whenever it detects significant excessive heat.

  • You need to test the continuity with the help of a tool known as a multimeter. 
  • If you probably don’t know how to use this tool, there are several guides to search for in order to get the information. It’s not really a difficult task.
  • If you notice that there is no continuity in the thermal fuse, that is a sign that it obviously needs a replacement.
  • However, in order to replace it yourself you will be required to unscrew some part of the dryer. You should be able to do this with some necessary tools and home equipment. 

6. Too Much Heavy Laundry Load In Dryer

Another way to fix this issue is to ensure that there isn’t too much load in the dryer. Reduce the load in the appliance and then check again if the problem has stopped.

7. Activate Whirlpool Duet Dryer Diagnostic Mode

Activating the diagnostic mode on a whirlpool duet is a way of carrying out some certain tests on the dryer to detect the issue and troubleshoot the appliance. 

In order to enter the diagnostic mode, press and hold any button apart from “Pause, Cancel and Lock, Unlock” buttons for 2 to 3 seconds.

Make sure the dryer is in standby mode before doing this, then all the LED lights on the control panel should be illuminated simultaneously.

Related: Frigidaire Affinity Dryer Keeps Beeping

What Should I Do If Any Of These Methods Doesn’t Work?

If you carry out the aforementioned procedures of fixing the problem very well, the issue should be fixed without a doubt. But it doesn’t get fixed despite that, then you need to get in touch with a serviceman to assist you.

How Can I Reach Out To Whirlpool Customer Service Support?

The easiest way to get in touch with whirlpool perhaps you couldn’t get a qualified service man is via their phone numbers. 

US: 1-866-698-2538

Canada: 1-800-807-6777

Final Thoughts

Now that you have this formula, you will have no trouble fixing “whirlpool duet dryer beeps once won’t start” problem.

It’s really a great fixing technique if you’re experiencing this problem with no display of error codes.

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like