The lid lock is one of the most vital components of a washing machine, it is similar to a safety mechanism that ensures effective operation of the appliance.
Do you have a maytag washer which is probably malfunctioning and you are struggling to bypass the lid lock?
Be rest assured that we’ll be highlighting step-by-step procedures on maytag washer lid lock bypass and other important information.
Note: It’s not recommended that you bypass the lid lock feature of your maytag washer and this is due to safety purposes.
The lid lock ensures that you wash your clothes with peace of mind without having to fear tampering and getting injured because of the spinning interior of the washer.
Despite these precautions, if you are still willing to bypass the lid lock of your maytag washing machine, keep on reading in order to find out.
How To Bypass Lid Lock On Maytag Washer?
Carrying out these procedures isn’t really difficult or requires tough tasks. You just have to follow some very simple steps which will be highlighted below.
The good news is that you only need $0 to complete these procedures as long as you can spare a maximum of 5 minutes and aren’t afraid to roll up your sleeves.
In order to bypass a maytag washer lid lock, follow these steps:
Step 1: The first and most important step is to unplug the washer from the power source or flip the circuit breaker. This is very important in order to avoid electricity dangers and shocks.
Step 2: Manually locate the lid lock switch or assembly by unscrewing some parts of the top lid. The lid lock assembly is usually attached to the underside of the lid or the top of the washing machine’s cabinet.
Step 3: Once you have access to the lid lock switch, disconnect all the wires connected to it (you’ll mostly find a few red and blue colored wires on it).
At this point you can use a multimeter to test the continuity of the lock switch in order to check if it’s open (unlocked) or closed (locked).
Step 4: Now we’re at the point of actually bypassing the switch. In order to bypass the lid lock, you need to connect the two wires that lead to the switch together. (Short-circuit).
What this means is that you have created a kind of closed circuit which makes the washing machine assume the lid is locked, allowing it to operate without the switch.
Step 5: Use a tape to secure the two wires so that they don’t come apart and get in contact with other surfaces.
Step 6: Reconnect all the wires that were previously disconnected from the lid lock switch, then put the top lid back together.
Plug the washer back into the power source and test it to see if it’s working perfectly. It should be working perfectly now that the lid lock has been bypassed!
The washing machine will no longer get locked during a cycle and you can check whatever’s in the interior while operating.
Maytag Bravos Xl Washer Lid Lock Bypass
All maytag washing machines are not manufactured the same way which is why there might be a slightly different procedure to bypass the lid lock on a maytag bravos xl washer.
To bypass lid lock on maytag bravos xl washer, below is the procedure.
- Turn off the washer and locate the lid lock switch which is typically located near the front of the washing machine.
- Bring out the lid lock switch and remove the top. Disconnect all the wires connected to it.
- Some of these models have a magnetic sensor which is what we need to bypass. Connect the two wires that lead to the switch together.
- Tape them and reconnect the washer back together.
Maytag Centennial Washer Lid Lock Bypass
The maytag centennial washer is another type of maytag washing machine with an active lid lock also. In order to bypass the lid lock, follow the procedures below.
- Unplug the washer and find the lid lock switch location. Normally, it’s usually found at the underside of the lid near the front of the washing machine.
- Some models come with a magnetic sensor which is what we are looking forward to bypassing. Connect the two wires that lead to the switch together.
- Then use a tape to secure the two wires, before reconnecting the washer back together.
Maytag Commercial Washer Lid Lock Bypass
To bypass lid lock on maytag commercial washer, below are the procedures to follow.
- Unplug the washer and locate the lid lock switch which is typically located near the front of the washing machine.
- Bring out the lid lock switch and remove the top. Disconnect all the wires connected to it.
- Some of these models have a magnetic sensor which is what we need to bypass. Connect the two wires that lead to the switch together.
- Tape them and reconnect the washer back together. Then test if the lid lock has been bypassed.
What Are The Risks Of Bypassing The Lid Lock Of A Maytag Washer?
It is important to note that bypassing the lid lock can be very dangerous and may lead to several negative consequences such as voiding the warranty of the washing machine, damage to the appliance, safety consequences and many more.
#1. Safety Consequences
The main purpose of the lid lock is to protect you from getting in contact with the agitator while spinning, in order to avoid injuries.
It’s an important safety feature that prevents the appliance from starting a cycle when the lid is opened.
If this feature gets bypassed, the user is obviously left exposed to possible accidents and injuries.
#2. The Warranty Gets Voided
Most manufacturers usually ensure that a warranty is attached to every appliance, so if the appliance is tampered with or modified – the warranty is automatically voided.
What this means is if you attempt to tamper with the washing machine by bypassing the lid lock, you no longer have access to future assistance from the manufacturer in terms of replacements or repairs.
#3. Cause Damage To The Machine
Basically, you shouldn’t be tampering with any appliance if you are not a professional or appliance technician.
You could damage the washer while attempting to bypass the lid lock feature which eventually leads to further costly repairs.
Final Thoughts
With the help of the detailed step by step procedures, we hope you have been able to bypass the lid lock feature on your maytag washer.
Once again, maytag washer lid lock bypass is not actually recommended as it could void the warranty of the appliance, damage it or lead to other injuries.
Below are some related articles to check out!!
