Is your whirlpool washer off of balance and you don’t know the reasons for this and how to fix it? Be rest assured that you’re at the right place to find a correct answer to your problem.
The chances are that your Whirlpool washing machine is off balance because of an unbalanced washer, damaged shock absorber, excessive loads in the washer, corroded shaft, presence of heavy foreign objects, damaged drum bearing, worn out suspension rods and dampening straps.
In this article we’ll be highlighting how you can troubleshoot these issues with simplified fixes. Let’s get into it!
Why Does My Whirlpool Washer Keep Getting Off Balance?
How to fix a whirlpool washer that is off balance?
There are numerous reasons why you might be experiencing this issue with your whirlpool washing machine, most of which has been mentioned above.
In a rush? Here is a tabular representation that shows you the reasons and quick ways to fix an unstable whirlpool washer.
| Problems | Quick Fixes | |
| 1 | Heavy foreign items are in the washer | Inspect the inner tub for any stuck foreign objects and get rid of them. Ensure the items are placed evenly. |
| 2 | Problem with the shock absorber | Inspect for any leaks in the shock absorber and prepare for replacement. |
3 | The washing machine is not leveled on ground | Check and adjust the rubber anti-vibration pads under the washer feet. Also ensure it’s not tipping forward and backwards. |
| 4 | Damaged or worn out bearings | Remove and replace damaged drum bearings. |
| 5 | Unbalance loads in the washer | Remove excess loads in the washer until the washer stops banging against opposite sides. Wash a few loads at a time and remove large and bulky ones. |
| 6 | Corroded washing machine shaft | Check if it’s sheared or corroded then replace. |
| 7 | The agitator have come loose | Reattach or replace the entire agitator if necessary. |
| 8 | Faulty suspension rods | Find suitable replacements for the damaged suspension rods. |
Related Post: Samsung Washer Off Balance (Fixed)
Below is a detailed explanation of the reasons for an unbalanced Whirlpool washing machine and how you can fix them accordingly.
1. Presence of Heavy Foreign Items Are In The Washer
Stuck items or presence of heavy foreign objects might lead to an abnormal functioning of your whirlpool washer.
In situations like this, all you have to do is check if there are any stuck materials in the drum or around, then remove them.
In addition to this, you should remove any heavy items in the washer and put them in a different space.
You should wash these items one at a time as they’re so huge and should not be washed together in order to avoid getting your washing machine off balance while spinning.
2. The Washing Machine Is Not Leveled On Ground
One of the reasons why your Whirlpool washing machine is off balance or out of balance during is due to appliances not being leveled.
whirlpool washers have 4 leveling feet with rubber anti-vibration pads placed underneath. The feet are expected to stay firm in order to work efficiently.
If any of these legs gets uneven or the rubber anti-vibration pads have come loose, it could cause your washing machine to be off balance.
Nevertheless, Begin to loosen the lockings by turning the legs clockwise and then adjust with a wrench or by hand.
- To fix a whirlpool washer out of balance issue, you need to inspect and adjust the legs of the washer and ensure it’s not tipping forward and backwards.
- Check the flooring condition by ensuring it’s in good condition as it shouldn’t be cracked or waterlogged. If the flooring is moldy, repair the flooring or consider changing the area of the washer to a different location.
3. Unbalance Loads In The Washer
If there are excess unbalanced loads in your whirlpool washer, it could cause the appliance to tilt to and fro as it gets out of balance.
In order to fix this an unbalanced whirlpool washer, ensure that you put only the correct amount of loads in the washer which is proportional to the drum size.
Remove excess loads and follow the instructions in your manual. It’s recommended that you leave a little bit of space between the loads in order to allow free flow of water.
4. Problem With The Shock Absorber
Shock absorbers are among the components that participate in the balance of a whirlpool washer. It goes between the outer tub and the base frame. If it’s worn out or damaged, it could be another reason why your washer might be unbalanced.
In order to fix a broken or faulty shock absorber, you need to dismantle the washing machine and take out the shock absorber.
You might need the help of a specialist to remove the back panel, dismantle the appliance and replace the shock absorber. Irrespective of that – do note that all this needs is a replacement.
5. Corroded Washing Machine Motor Shaft
It’s really possible for the shaft of your washer to get corroded if it keeps getting in contact with water or detergent. A slight damage can result in the washer not getting balanced during a cycle.
The method to fix this issue is to replace the motor shaft with a new one. Once it’s replaced, your washing machine should stop spinning off balance.
6. Damaged Or Worn Out Bearings
The drum bearings play a very important role in supporting the rotation and spinning of your washing machine. Drum bearings usually wear out if water continuously seeps through the seals around the metal bearings.
- For whirlpool front loaders, the drum bearings are located at the rear of the outer tub while top-loading whirlpool washers have their bearings attached to the inner tub.
- In order to replace a damaged bearing, what you need to do is take apart the washing machine and replace the worn out bearings.
7. Faulty Suspension Rods
A whirlpool washing suspension rod does not get damaged easily as they usually last for a minimum of 4 years. The rods act as a support for the washer tub and prevent it from being unstable and unbalanced.
Sometimes it does get damaged and worn out with time and this could be a reason why your washer is getting out of balance.
To fix this, you need to locate the suspension rods by removing the top and front panels. Inspect if the suspension rods are damaged before replacing.
Related Post: Ge Washer Out Of Balance (How To Fix)
8. The Agitator Have Come Loose
This is usually common for top load Whirlpool washing machines. Sometimes, the agitator might get loose and this can result in the washer being unbalanced.
In order to check if the agitator of your washer is loosen or not, you need to place your hands inside the drum and inspect the center. Turn the agitator with your hand to inspect if it’s stable or not.
However, if it’s detached you can use a wrench to reattach it back. Be aware that if the agitator is completely damaged, you might need to replace it.
Frequently Asked Questions
Whirlpool Top Load Washer Off Balance?
Agitator issues are mostly associated with whirlpool top loaders. If your whirlpool top load washing machine is getting off balance, you should inspect the agitator, suspension rods, drum bearings, reduce the amount of loads, inspect the shock absorber and check the shaft.
Whirlpool Front Load Washer Off Balance?
Note that if your whirlpool top load washing machine is getting off balance, you should inspect the shock absorber, reduce the amount of loads, check the drum bearings, washing machine shaft and inspect the suspension rods.
Final Thoughts
With the detailed information above, we hope you’ve been able to fix your whirlpool washer that is off balance. Perhaps you are still experiencing difficulties in fixing the issue, you might definitely need the assistance of an appliance technician.
